Jump to content

CCHs (HCOB 651201)

From scientopedia
Revision as of 20:59, 8 February 2026 by Selannd (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

As per HCO Pol Ltr May 17th 65. The CCH's are processes. They are not Drills. The following revised rundown on the CCH's is to be used by all auditors.

Control - Communication - Havingness Processes

The following rundown of CCH 1, 2, 3 and 4 have been slightly amended. CCH'S are run as follows:

CCH 1 to a flat point then CCH 2 to a flat point then CCH 3 to a flat point then CCH 4 to a flat point then CCH 1 to a flat point, etc.

CCH 1

NAME: GIVE ME THAT HAND. Tone 40.

AUDITING COMMANDS: GIVE ME THAT HAND.

Physical action of taking hand when not given and then replacing it in the PC'S lap. Making physical contact with the PC's hand if PC resists. THANK YOU ending each cycle.

All Tone 40 with clear intention, one command in one unit of time. Take up each new Physical change manifested as though it were an origin by the PC when it happens, and querying it by asking "What's happening?" This two way comm is not Tone 40. Run only on the right hand.

AUDITING POSITION: Auditor and PC seated in chairs without arms. Auditor's knees on outside of both PC's knees.

PROCESS PURPOSE: To demonstrate to PC that control of PC's body is possible, despite revolt of circuits, and inviting PC to directly control it. Absolute control by auditor then passes over towards absolute control of his own body by PC.

Never stop process until a flat place is reached. Freezes may be introduced at end of cycle, this being after the THANK YOU and before the next command, maintaining a solid comm line, to ascertain information from the PC or to bridge from the process. Tone 40 Command = Intention without reservation. Change is any physical, observed manifestation.

CCH 2

NAME: TONE 40 8c

AUDITING COMMANDS: YOU LOOK AT THAT WALL. THANK YOU. / YOU WALK OVER TO THAT WALL. THANK YOU. / YOU TOUCH THAT WALL. THANK YOU. / TURN AROUND. THANK YOU.

Take up each new physical change manifested as though it were an origin by the PC, when it happens, and querying it by asking "What's happening?" This two way comm is not Tone 40. Commands smoothly enforced physically when necessary. Tone 40, full intention.

AUDITING POSITION: Auditor and PC ambulant, Auditor in physical contact with PC as needed.

PROCESS PURPOSE: To demonstrate to PC that his body can be controlled and thus inviting him to control it. To orient him in his present time Environment. To increase his ability to duplicate and thusly increase his Havingness.

CCH 1 and CCH 2 were developed by L RON HUBBARD in Washington, DC in 1957 for the 19th ACC.

CCH 3

NAME: HAND SPACE MIMICRY

AUDITING COMMANDS: Auditor raises 2 hands palms facing PC's about an equal distance between the Auditor and PC and says "PUT YOUR HANDS AGAINST MINE, FOLLOW THEM AND CONTRIBUTE TO THEIR MOTION". He then makes a simple motion with right hand then left. "DID YOU CONTRIBUTE TO THEIR MOTION?" Acknowledge answer. When this is flat, the Auditor does this same with a half inch of space between his and the PC's palms. The command being "PUT YOUR HANDS FACING MINE ABOUT 1/2 INCH AWAY, FOLLOW THEM AND CONTRIBUTE TO THEIR MOTION". "DID YOU CONTRIBUTE TO THEIR MOTION?" Acknowledge. When this is flat, Auditor does it with a wider space and so on until PC is able to follow motions a yard away.

AUDITING POSITION: Auditor and PC seated, close together facing each other, PC's knees between Auditor's knees.

PROCESS PURPOSE: To develop reality on the auditor using the reality scale (solid communication line). To get PC into communication by control and duplication. To find Auditor.

HISTORY: Developed by L. Ron Hubbard in Washington, DC 1956 as a therapeutic version of Dummy Hand Mimicry.

CCH 4

NAME: BOOK MIMICRY

AUDITING COMMANDS: THERE ARE NO SET VERBAL COMMANDS.

Auditor makes simple motions with a book. Hands book to the PC. PC makes motion, duplicating Auditor's mirror-image-wise. Auditor asks PC if he is satisfied that the PC duplicated the motion. If PC is and Auditor is also fully satisfied, Auditor takes back the book and goes to next command. Tone 40, only in motions, verbal 2-way quite free.

AUDITING POSITION: Auditor and PC seated facing each other, a comfortable distance apart.

PROCESS PURPOSE: To bring up PC's communication with control and duplication (control and duplication = communication).

HISTORY: Developed by LRH for the 16th ACC in Washington, DC 1957. Based on duplication. Developed by LRH in London, 1952.

Document information

Document type: HCO Bulletin

Date: 1 December 1965

Author: L. Ron Hubbard

Place: Saint Hill Manor, East Grinstead, Sussex

Distribution: Remimeo

Destination: All Students, St Hill Courses, All Staff

Note: Replaces HCO Bulletin of July 5th 1963 CCH's Rewritten